PT. Maju Bersama Drivindo

Geared Motor RE 8005 HC - ME 132 B3 P1H

Dinamic Oil Gearmotor Dinamic Oil 19 February 2021

Specifications of Geared Motor RE 8005 HC - ME 132 B3 P1H :

The variation ratio available for Type RE 8005 HC - ME 132 B3 P1H is according to the table below.

Input Speed 1450 RPM
Ratio	Output Speed	Power Rating	Torque
`647.15`	`2.2 RPM`	`26.0 kW`	`97700 Nm`
`714.10`	`2.0 RPM`	`25.2 kW`	`104000 Nm`
`792.79`	`1.8 RPM`	`22.0 kW`	`101000 Nm`
`890.81`	`1.6 RPM`	`19.2 kW`	`99400 Nm`
`991.80`	`1.5 RPM`	`19.1 kW`	`110000 Nm`
`1117.88`	`1.3 RPM`	`15.5 kW`	`101000 Nm`
`1266.57`	`1.1 RPM`	`13.7 kW`	`101000 Nm`
`1416.68`	`1.0 RPM`	`14.1 kW`	`116000 Nm`
`1589.42`	`0.91 RPM`	`10.0 kW`	`92200 Nm`
`1777.79`	`0.82 RPM`	`11.6 kW`	`120000 Nm`
`1993.85`	`0.73 RPM`	`10.5 kW`	`122000 Nm`
`2236.25`	`0.65 RPM`	`7.8 kW`	`101000 Nm`
`2510.77`	`0.58 RPM`	`8.7 kW`	`126000 Nm`
`2813.91`	`0.52 RPM`	`6.6 kW`	`108000 Nm`
`3164.84`	`0.46 RPM`	`6.4 kW`	`118000 Nm`

Applications of Geared Motor RE 8005 HC - ME 132 B3 P1H :

Auto Feeder.

Description :

Gearbox is a machine tool that functions to reduce the speed (Speed Reducer) by using a gear with a gearset so that the spinning into the gearbox will be reduced according to the total gear ratio in the gearbox.

Dinamic Oil is a Gear Box brand that uses the PLANETARY GEAR design produced by DINAMIC OIL S.P.A in Bomporto, Modena-Italia. Dinamic Oil founded in 1970, is an Italian manufacturer that focuses on Hoisting Winches and Planetary Gearboxes. With 50 years of experience that is constantly being improved through research and development to offer customized solutions for industrial and machine applications. PT. Maju Bersama Drivindo based in Medan is trusted as an AUTHORIZED DISTRIBUTOR & SERVICE CENTER in Indonesia since 2010 and also licensed to assembly in our workshop in Medan.

Dinamic Oil Geared Motor Type RE 8005 HC - ME 132 B3 P1H is a Foot Mounted geared motor with In-line Planetary Gear design with configuration using Solid shaft output and IEC Flange Input adaptor that suitable for Electric motor with frame size 132 of IEC Standart. The Gearbox consist of 5 Stage of Planetary gear reduction and equipped with 1 set of Steel Frame / Detachable Feet. This geared Motor will usually assembled / Couple With an IEC Flange Mounted 3 phase 4 pole electromotor (1,450 Rpm) without additional Power Transmission accesories such as Coupling, Pulley or Sprocket.

The smallest ratio of this Geared Motor starting from the ratio 1 : 647.15 to the largest ratio is 1 : 3164 .84 with a power rating ranging from 6.4 kW to 26.0 kW at 1450 rpm input.

As for some common applications that use this Geared Motor is Auto Feeder.